1.5cm. It can be arranged according to the manual after buying the guide rail. Pay attention to the accuracy of drawer production. If the accuracy is not enough, it is difficult to grasp the clearance. During installation, install the guide rail first, and then the drawer or cabinet plate, so as to facilitate commissioning. In addition, coins can also be used to insert seams, and the reserved gap can reach the thickness of coins.
The drawer slide is generally configured with three hidden sections. First measure the data such as drawer length and depth, and then select the matching slide for installation. Assemble the drawer after the slide rail is installed. Generally, five boards are used: 2 side plates, 1 back plate, 1 panel and 1 thin plate. The board is fixed with screws and installed on the slide rail. The drawer should coincide with the nail hole.
