The slide rail of the drawer is broken. The rails on both sides of the cabinet to facilitate the push and pull of the drawer are called slide rails. There are many specifications and styles of these two rails.
The drawer needs to be removed before installing the slide rail. Both sides of the old cabinet are fixed. Therefore, the drawer must be pulled out first and the slide on the drawer must be removed before the drawer can be removed. After the drawer is removed, the slide rails fixed on both sides inside the cabinet need to be removed.
Then, according to the original installation on the cabinet, remove and replace the newly purchased slide rails one by one. During installation, be sure to align with the original screw holes. If you want to find a place to screw the screws again, the slide position on the drawer should correspond to the position of the slide rail in the cabinet, otherwise the drawer will not be pushed in or stuck in the middle. After installation, you can try.
